TReVAPOR

Three-pass steam boilers

Home | Prodotti | Industrial Boilers | Steam Boilers | TReVAPOR

Steam production: 1200 ÷ 6500 kg/h

Nominal power: 818 ÷ 4770 kW

Design pressure: 12 bar

Efficiency: 90,5 %

Download the technical brochure

Description

The TReVAPOR range encompasses steam generators designed to exceed today’s standards in terms of efficiency and low polluting emissions, without renouncing the very high safety and reliability standards, which have always been a distinguishing feature of ICI CALDAIE products. Certified as Assembly according to the PED 2014/68/EU directive also in its basic equipment, each model in the range can be customized to meet every need thanks to a wide range of configurations and accessories available.

Certifications

Available Technologies

Advantages

High steam quality

At high load the internal separator prevents the entrainment of water droplets to the steam outlet, the steam produced is then always of high quality having a very high dryness fraction.

Advanced management technology

The boiler can be equiped with programmable logic technology that allows complete compatibility with any data acquisition system, also allowing the adjustment of parameters through the display.

Efficiency at all costs

Integrated solutions for increased performance and efficiency through flue gas heat recovery fully integrated into the structure of the boiler.

Maximum security

The generator has been designed in accordance with the strictest international safety regulations in force.

Reliability and durability

Maximum reliability and durability guaranteed through design with low surface heat losses.

Configurable to specific requirements

A wide range of optional accessories are available to customize the product to meet specific requirements.

Boiler Accessories

Self Monitoring High Level Alarm Kit

This system ensures that the level in the boiler does not exceed the allowed value thus avoiding flood problems. It consists of a “fail safe” probe connected to an electronic…

Backup Supply Pump

The backup pump is supplied to ensure the constant operation of the boiler, avoiding downtime in case of a main pump failure. The pump is installed in parallel to the…

Ladders and Platforms

The structure consists of carbon steel profiles connected by special joints that ensure their correct coupling. The upper handrail parapet is suitably made and fixed by housings welded to the…

Eterm Easy Manager Panel

Control panel with 15” touch screen for a personalised view of the heating plant room (synoptic diagram). The panel must be connected via bus to the boiler Eterm control panels…

Salinity Control Unit

The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…

Boiler Room Ancillaries

ADD

Automatic system for the treatment of steam boiler make-up water, designed to prevent scale deposits and corrosioncaused by dissolved gases. The treatment includes a softening process by means of ion-exchange…

BDV

The BDV blowdown vessel has been designed to receive sludge that usually settle at the bottom of the steam boilers which is discharged during a bottom blowdown operation; this sludge…

EVX

Design pressure 12 (15 bar upon request) The EVX-series steam boilers are horizontal semi-fixed boilers provided with an exchange coil containing a primary fluid such as thermal oil or super-heated…

VEA

Design pressure 5 or 12 bar The VEA expansion vessel has been designed to absorb the volumetric variations of the water in the system, due to the temperature increase. The…

VEX

Design pressure 5 or 12 bar The VEX series steam accumulators are semi-fixed, horizontal, complete with accessories. Our accumulator receives steam from a boiler, therefore it has no internal coil…

DEG

The DEG deaerators are devices at atmospheric pressure designed for the thermophysical degassing of the steam boiler feed water. The degassing process is performed by means of a controlled steam…

COV

Distribution headers are designed to allow economic distribution of the media (steam, water, thermal oil) to the individual users. The Distribution headers are individually designed to match the system requirements…

VRC

The condensate collection tank (VRC) has been designed to collect condensate returning from the steam system team and to mix it with the make-up softened or demineralised water. Entirely made…

Attachments

To download the technical documentation you must be logged in.

Login

Have you lost your password?