ISG

Indirect clean steam boiler

Steam production: 160 ÷ 2750 kg/h

Nominal power: 115 ÷ 2054 kW

Design pressure: 6 bar

Download the technical brochure

Description

Clean indirect steam boiler easy to install thanks to duly sized components, mounted and connected at the factory and subjected to functional test. ISG series clean steam boilers use a U-shaped tube bundle as heat exchanger and represent the cheapest method to produce clean steam when technological steam is used as a energy source. All parts in contact with water and steam of the casing side are made of stainless steel AISI 316 or AISI 304.

Certifications

Available Technologies

Advantages

Easy, fast and safe installation

The installation is very easy: you just need to connect the system to the electric, hydraulic, steam and discharge lines.

Certification of “assembly”

According to the PED Directive to streamline commissioning procedures.

Guarantee of “clean” steam

Since it cannot be contaminated by corrosions internal to the boiler as its parts in contact with the steam are fully made in stainless steel.

Supervision not needed for 24 h

In its standard installation, the boiler is certified to operate without supervision for 24 h and with additional accessories for 72 h

Boiler Accessories

Self Monitoring High Level Alarm Kit

This system ensures that the level in the boiler does not exceed the allowed value thus avoiding flood problems. It consists of a “fail safe” probe connected to an electronic…

Backup Supply Pump

The backup pump is supplied to ensure the constant operation of the boiler, avoiding downtime in case of a main pump failure. The pump is installed in parallel to the…

Ladders and Platforms

The structure consists of carbon steel profiles connected by special joints that ensure their correct coupling. The upper handrail parapet is suitably made and fixed by housings welded to the…

Eterm Easy Manager Panel

Control panel with 15” touch screen for a personalised view of the heating plant room (synoptic diagram). The panel must be connected via bus to the boiler Eterm control panels…

Salinity Control Unit

The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…

Boiler Room Ancillaries

ADD

Automatic system for the treatment of steam boiler make-up water, designed to prevent scale deposits and corrosioncaused by dissolved gases. The treatment includes a softening process by means of ion-exchange…

BDV

The BDV blowdown vessel has been designed to receive sludge that usually settle at the bottom of the steam boilers which is discharged during a bottom blowdown operation; this sludge…

EVX

Design pressure 12 (15 bar upon request) The EVX-series steam boilers are horizontal semi-fixed boilers provided with an exchange coil containing a primary fluid such as thermal oil or super-heated…

VEA

Design pressure 5 or 12 bar The VEA expansion vessel has been designed to absorb the volumetric variations of the water in the system, due to the temperature increase. The…

VEX

Design pressure 5 or 12 bar The VEX series steam accumulators are semi-fixed, horizontal, complete with accessories. Our accumulator receives steam from a boiler, therefore it has no internal coil…

DEG

The DEG deaerators are devices at atmospheric pressure designed for the thermophysical degassing of the steam boiler feed water. The degassing process is performed by means of a controlled steam…

COV

Distribution headers are designed to allow economic distribution of the media (steam, water, thermal oil) to the individual users. The Distribution headers are individually designed to match the system requirements…

VRC

The condensate collection tank (VRC) has been designed to collect condensate returning from the steam system team and to mix it with the make-up softened or demineralised water. Entirely made…

Attachments

To download the technical documentation you must be logged in.