Nominal power: 420 ÷ 3000 kW
Design pressure: 5 bar
Efficiency: > 95,0 %
Three pass, wet back, low thermal load boiler, with single pass flame furnace, connected to forced draft burners with operation on liquid or gaseous fuels. The boiler is designed to be used in systems with water temperature between 60 and 100°C (safety thermostat set at 110°C).
Extremely high energy efficiency thanks to the large exchange surfaces allowing top efficiency values under all operating conditions.
The generator has been designed in accordance with the strictest international safety regulations in force.
NOx emissions in compliance with the most stringent standards thanks to the extremely low volumetric thermal load designed to obtain the best coupling with low emission burners.
The construction features are such to make it particularly suitable to high working loads and long working periods.
The installation is very easy: you just need to connect the system to the electric, hydraulic, steam and discharge lines.
Thanks to the very high water content and the very high thermal inertia, the boiler is suitable for any system solution, even in the most difficult operating conditions.
This system ensures that the level in the boiler does not exceed the allowed value thus avoiding flood problems. It consists of a “fail safe” probe connected to an electronic…
The backup pump is supplied to ensure the constant operation of the boiler, avoiding downtime in case of a main pump failure. The pump is installed in parallel to the…
The structure consists of carbon steel profiles connected by special joints that ensure their correct coupling. The upper handrail parapet is suitably made and fixed by housings welded to the…
Control panel with 15” touch screen for a personalised view of the heating plant room (synoptic diagram). The panel must be connected via bus to the boiler Eterm control panels…
The TDS control system limits the level of salts and minerals dissolved in the boiler water within the value allowed by the manufacturer thus avoiding any risks of carry over…
Automatic system for the treatment of steam boiler make-up water, designed to prevent scale deposits and corrosioncaused by dissolved gases. The treatment includes a softening process by means of ion-exchange…
The BDV blowdown vessel has been designed to receive sludge that usually settle at the bottom of the steam boilers which is discharged during a bottom blowdown operation; this sludge…
Design pressure 12 (15 bar upon request) The EVX-series steam boilers are horizontal semi-fixed boilers provided with an exchange coil containing a primary fluid such as thermal oil or super-heated…
Design pressure 5 or 12 bar The VEA expansion vessel has been designed to absorb the volumetric variations of the water in the system, due to the temperature increase. The…
Design pressure 5 or 12 bar The VEX series steam accumulators are semi-fixed, horizontal, complete with accessories. Our accumulator receives steam from a boiler, therefore it has no internal coil…
The DEG deaerators are devices at atmospheric pressure designed for the thermophysical degassing of the steam boiler feed water. The degassing process is performed by means of a controlled steam…
Distribution headers are designed to allow economic distribution of the media (steam, water, thermal oil) to the individual users. The Distribution headers are individually designed to match the system requirements…
The condensate collection tank (VRC) has been designed to collect condensate returning from the steam system team and to mix it with the make-up softened or demineralised water. Entirely made…
To download the technical documentation you must be logged in.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
Non sono presenti documenti di questo tipo.
– n° 2 GREENOx.e 70
[...]
– n° 1 REX Dual 40 F stacked
– n° 1 REX Dual 80 F stacked
– n° 2 Thermostatic control panel REX_GREENOX
[...]
– n° 2 REX 140
– n° 2 REX 15
– n° 4 Thermostatic control panel REX_GREENOX
[...]
– n° 2 REX 180
– n° 1 REX 95
– n° 3 Thermostatic control panel REX_GREENOX
[...]
– n° 1 REX 62
– n° 1 Thermostatic control panel REX_GREENOX
[...]
– n° 1 REX 95
– n° 1 REX 35
– n° 2 Thermostatic control panel REX_GREENOX
[...]
– n° 1 GREENOx.e 260
– n° 1
– n° 1 Gas modulating pressure jet burner
– n° 1 TNOX.e EN 7000
– n° 1 Gas on/off pressure jet burner
[...]
– n° 1 REX 35
– n° 2 REX 50
– n° 3 Thermostatic control panel REX_GREENOX
[...]
– n° 1 GREENOx.e 60
[...]
The main scope of the project was to supply the best technical and commercial solution for a new boiler room with condensing boilers in order to increase the quality of life into the prison institutio [...].
Service SECTOR: After-Sales Service Through this service the customer can request support from ICI Caldaie for personalized assistance.The...
Service Service With the new Assistance Services, specific for the different types of generators and the impact they...
Service SECTOR: Post-Vendita Service Once installation has taken place, it is possible to request a test of the...
Service Service Through this service the customer can agree a personalized Spare Parts List with ICI.The service allows...
Service Service ICI offers its customers a rental service for steam, hot water, superheated water and diathermic oil...
Service SECTOR: Pre-Sale Service ICI, through its technical-engineering team, offers a design and construction service for the entire...
Service SECTOR: Pre-Sale Service ICI provides the customer with highly specialized personnel capable of evaluating the requests of...
If you need further information, samples, a quote or advice for a project, please fill out the form below and we would be happy to help.
Reverse flame boiler with cylindrical furnace completely closed on the rear side by a dished end supported by...
Nominal power: 90 ÷ 3500 kW
Design pressure: 5 bar
Efficiency: from 92.0% to > 95.0%
