Print

Industrial Range Accessories

The accessories are components designed to be combined with specific products in order to respond to multiple requests for technical solutions from clients while ensuring, at the same time, the maximum usability of the generator.

SIDE PLATFORM

Ideal for boiler rooms with low headroom that does not allow to install ladder and handrail on top of the generators.  The structure, built according to the EN1090 standard, is made of welded carbon steel profiles.  The upper protection rail is suitably made and ...

SEPARATE CONTROL PANEL FOR MANAGING THE SEQUENCE OF TWO OR MORE STEAM BOILERS

Separate control panel for managing the sequence of two or more steam boilers.  It can be supplied with three different configurations:  - EASY - PLUS - LOAD ...

SAMPLE COOLER

In order to make sure that the generator is operating within the parameters of conductivity,water samples must be analyzed In order to obtain accurate and safe samples, it is essential that there is adequate cooling in order to condense any rising steam before sample acquisition. The ...

SALINITY CONTROL GROUP (pneumatic or electric TDS)

TDS  control system limits the salt and mineral levels dissolved in boiler water within permitted manufacturer values, thus avoiding any risk of entrainment due to high salinity levels and minimizing the amount of purge ...

SALINITY CONTROL GROUP (electronic light TDS)

For generators ≤ BX 600 and ≤ SIXEN 2000 assembled electrically and hydraulically to the generator. TDS control system limits the levels of salts and minerals dissolved in boiler water within permitted manufacturer values, ...

RETURN WATER TEMPERATURE CONTROL SYSTEM

To maintain the minimum return temperature and the maximum flow/return ∆T within the allowed limits, a recirculation system is installed between the flow and return connections which recalculates a suitable water flow rate in order to rise the ...

MODULATING LEVEL ADJUSTMENT SYSTEM

With this system, the level in the boiler is continuously adjusted by a PID regulator that controls the opening of a modulating valve downstream of the pump to supply maintained always in function.  The water flow is thereby constantly adapted to ...

MODULATING FEED WATER SYSTEM 1 OR 2 PUMPS

With this system, the water level is maintained by a PID controller regulating the speed of the duty feed pump. The on/off level control is maintained for the standby pump, to be activated in case of duty pump failure.  The feed water ...

MODULATING FEED WATER SYSTEM (W/1 or 2 PUMPS) AND CONTROL PANEL WITH INVERTER

With this system, the water level is set by a PID controller regulating the rotation speed of the duty feed pump. The feed water flow rate is constantly adjusted to the steam demand, in ...

LADDER AND HANDRAIL

Built from sectional steel pieces assembled by special joints which guarantee the good coupling of each element. The upper handrail is opportunely designed and fixed to the boiler by means of suitable housings which are welded to the boiler frame to guarantee perfect ...

HIGH LEVEL SECURITY KIT

Kit designed to prevent an excessive increase of water level inside the boiler. Upon reaching the set level, the system intervenes by stopping the supply pump and indicating the event with an audible alarm. Alarm resetting and pump restart automatically occur ...

FX AND FX DUAL GENERATOR BASE KIT

Generalities  Accessorized support adapted to be positioned and fastened on the right-hand side of the steam generator, and to host, in addition to the electrical panel of the boiler, a water softener and a condensate collection tank/ supply tank ...

FINNED BATTERY CONDENSER SERIES ECXX - I

Backup battery to install at the back of the heat generator with vertical flow of smoke to pre-heat an external low-temperature circuit to a heat generator by means of partial recovery of the sensitive heat and latent heat of combustion smoke.  ...

EtermEASYmanager panel

Control panel with 15” touch screen display for the customised graphic display of the thermal power plant (synoptic). The panel can be connected via bus to eterm boiler management panels and to Nereix devices (thermal power plant and/or apartment metering devices).  From ...

BURNER SUITABLE FOR APPLICATION IN GREENHOUSES

Burner with extremely low emissions, suitable for application in greenhouses with a CO2 fertilising system, suitable with METHANE GAS (or DIESEL) with modulating operation.    Single-block burner with integrated ventilated ...

BOILER MANAGEMENT PANEL QATRXETERM02

Control panel for traditional and condensing boilers with a microprocessor PCB with upgradeable firmware  Standard equipment:  - Main switch   - Burner operation switch (0-1)   - Safety thermostat  - Boiler ...

BOILER MANAGEMENT PANEL QATRXETERM01

Control panel for traditional and condensing boilers with a microprocessor PCB with upgradeable firmware  Standard equipment:  - Main switch   - Burner operation switch (0-1)   - Safety thermostat - Boiler ...

BACKUP SUPPLY PUMP (for steam boiler)

In order to ensure generator continuous operation while avoiding production stoppages in the event of fuel pump failure, a second backup pump is provided, installed in parallel with the service pump.  In the event of primary pump failure, ...

Backup Oil Circulation Uint PMX

Backup oil circulation group contains:  electric pump directly coupled to electric motor by joint, cast iron body, steel shaft with auto cooling mechanical seal, placed on support 2 flow start valves in spherical cast iron with sealing metal bellows, ...

AUTOMATIC BLOWDOWN SYSTEM (for GX-SIXEN-GSX series steam boilers)

The automatic bottom purging unit prevents unnecessary purging duplication or omission verifiable with the manual system. This system allows sludge accumulated at the bottom of the generator to be regularly ...

AUTOMATIC BLOWDOWN SYSTEM (for BX series steam boilers)

The automatic bottom blow down unit prevents unnecessary purging duplication or verifiable omission with the manual system. This system allows sludge accumulated at the bottom of the boiler to be regularly and automatically ...

AUTO DIAGNOSTIC LOW LEVEL SECURITY KIT

This system, provided as an alternative to series low level probes, is able to ensure with absolute certainty that boiler level does not drop dangerously below allowed value. Consists of 2 "fail safe" type probes connected to 2 distinct  ...

AUTO DIAGNOSTIC HIGH LEVEL SECURITY KIT

This system is designed to guarantee with absolute certainty that the level in the boiler does not exceed the allowed value while avoiding the flooding of the same. Consists of a "fail safe" type probe connected to a level electronic relay ...